B&C Speakers 21DS115 - 21,0 Zoll Lautsprecher - 4 Ohm
BC21DS115-4
- 3400 W continuous program power capacity
- 116 mm (4.5 in) four layer aluminum voice coil
- 30 - 1000 Hz response
- 99 dB sensitivity
- Double silicone spider with optimized compliance
- Ventilated voice coil gap for reduced power compression
- Aluminium demodulating ring for very low distortion
3400 WContinuous power handling. 4.5 in (116 mm)Voice coil diameter. Neodymium Inside SlugMagnet material. This next evolution subwoofer uses a new, longer, four layer aluminum voice coil. The result is more energy in the gap, less heat, higher sensitivity, higher power handling, lower distortion and better overall performance. The 21DS115 features a 36 mm long, 4.5 inch diameter (116mm) Copper Clad Aluminum Wire voice coil. With a 1700watt AES power rating, 99 dB sensitivity, and over 17 mm of Xvar, this high energy subwoofer is a significant step forward from similar models in the B&C range, even approaching the performance of our 6” voice coil alternatives..
Specifications | |
Nominal Diameter | 530 mm |
Nominal Impedance | 4 Ohm |
Minimum Impedance | 3,1 Ohm |
Nominal Power Handling1 | 1700 W |
Continuous Power Handling2 | 3400 W |
Sensitivity3 | 99,0 dB |
Frequency Range | 30 - 1000 Hz |
Voice Coil Diameter | 116 mm |
Winding Material | Aluminium |
Former Material | Glass Fibre |
Winding Depth | 36,0 mm |
Magnetic Gap Depth | 14,0 mm |
Flux Density | 0,8 TDesign |
Surround Shape | Triple Roll |
Cone Shape | Radial |
Magnet Material | Neodym |
Spider | Double Silicone |
Pole Design | T-Pole |
Woofer Cone Treatment | TWP Waterproof Both Sides |
Recommended Enclosure | 130,0 dm3 |
Recommended Tuning | 40 HzParameters4 |
Resonance Frequency | 30 Hz |
Re | 2,2 Ohm |
Qes | 0,2 |
Qms | 11,0 |
Qts | 0,21 |
Vas | 274,0 dm3 |
Sd | 1680,0 cm2 |
No | 3,4 % |
Xmax | ± 15,0 mm |
Xvar | ± 17,0 mm |
Mms | 412,0 g |
Bl | 28,8 Txm |
Le | 2,4 mH |
EBP | 150 HzMounting and Shipping Info |
Overall Diameter | 547 mm |
Bolt Circle Diameter | 527 mm |
Baffle Cutout Diameter | 508,0 mm |
Depth | 255 mm |
Flange and Gasket Thickness | 13 mm |
Air Volume Occupied by Driver | 15,0 dm3 |
Net Weight | 14,8 kg |
Shipping Units | 1 |
Shipping Weight | 17,1 kg |
Shipping Box | 570x570x320 mm |
Recone kit | RCK21DS1154Discover more2 hours tes |
- Air Volume Occupied by Driver
- 15.0 dm3 (0.53 ft3)
- Qms
- 11.0
- Einbautiefe
- 255 mm (10.04 in)
- Netto Gewicht
- 14.8 kg
- Recommended Enclosure
- 130.0 dm3 (4.59 ft3)
- Surround Shape
- Triple Roll
- MInimale Impedanz
- 3.1 Ω
- Re
- 2.2 Ω
- Resonanz Frequenz
- 30 Hz
- Außendurchmesser
- 547 mm (21.54 in)
- Tuning Frequenz
- 40 Hz
- Versandgewicht
- 17.1 kg (37.7 lb)
- Versandkarton
- 570x570x320 mm (22.44x22.44x12.60 in)
- Wicklung besteht aus
- Aluminium
- Pole Design
- T-Pole
- XVar
- ± 17.0 mm
- Shipping Units
- 1
- Xmax
- 15.0 mm
- BL
- 28.8 Txm
- Nominaler Durchmesser
- 530 mm (21.0 in)
- Qts
- 0.21
- ?0
- 3.4 %
- Le
- 2.4 mH
- EBP
- 150 Hz
- Mms
- 412.0 g
- Schwingspulendurchmesser
- 116 mm (4.5 in)
- Magnetic Gap Depth
- 14.0 mm (0.55 in)
- Vas
- 274.0
- Recone kit
- RCK21DS1154
- Qes
- 0.2
- Flange and Gasket Thickness
- 13 mm (0.51 in)
- Empfindlichkeit
- 99.0 dB
- Lochkreisdurchmesser
- 527 mm (20.7 in)
- Schallwandausschnitt
- 508.0 mm (20.0 in)
- Magnet
- Neodymium Inside Slug
- Cone Shape
- Radial
- Spider
- Double Silicone
- Winding Depth
- 36.0 mm (1.42 in)
- Nominale Belastbarkeit
- 1700 W
- Nominale Impedanz
- 4 Ω
- Former Material
- Glass Fibre
- Woofer Cone Treatment
- TWP Waterproof Both Sides
- Flux Density
- 0.8 T
- Frequenzbereich
- 30 - 1000 Hz
- Dauerbelastbarkeit
- 3400 W
- Sd
- 1680.0 cm2 (260.4 in2)
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.