Eighteensound 21LW1400 21inch Lautsprecher Chassis 8 Ohm
ES21LW1400
- 99 dB SPL 1W / 1m average sensitivity
- 100 mm (4 in) Interleaved Sandwich Voice coil (ISV)
- 1400W AES power handling
- Carbon fiber reinforced straight-ribbed cone
- Double Silicon Spider (DSS) for improved excursion control and linearity
- Double Demodulating Rings (DDR) for lower distortion
- Improved heat dissipation via unique basket design
- Weather protected cone and plates for outdoor usage
- Suitable for ultra low frequency systems
The 21LW1400 is a 21 inch high performance extended low frequency loudspeaker. The transducer can be used as a subwoofer component, in either a reflex, band-pass or horn-loaded configuration, in high power auditorium or arena loudspeaker systems. It provides clean and undistorted LF reproduction at very high SPL and enables the speaker to withstand high power levels without damage. The 21LW1400 design features include an exceptional displacement suspension system which, in conjunction with a carbon fiber reinforced straight-ribbed cone and the Double Silicon Spider (DSS), produces an ultra-linear piston action, providing full control across the entire working range. The 100mm inside outside copper voice coil, based on our Interleaved Sandwich Voice-coil (ISV) technology, reaches high levels of thermal stability and durability. ISV technology is based on a high strength fiberglas former with half the coil wound on the outside and half on the inside and bonded together using unique high temperature resin adhesives. This results in a balanced linear motor unit which can exert an exceptionally high force factor. The low distortion and unmatched sound quality of the 21LW1400 has been significantly improved by the Double Demodulating Rings (DDR) embedded in the pole piece of the magnetic structure. These have been designed to dramatically reduce the intermodulation and harmonic distortion while improving transient response at the same time. Excellent heat dissipation has been achieved using the special basket design which incorporates air channels between the basket and the magnetic top plate. In addition, 8 air vents incorporated into the back plate are aligned with the voice coil to force air into the lower part of the gap. 21LW1400 is ready to perform properly under inclement weather conditions. This has been achieved using of an exclusive treatment which improves pulp strength and gives water repellent properties to both sides of the cone. Moreover, a special treatment is applied to the top and back plate of the magnetic structure which is far more resistant to the corrosive effects of salts and oxidization than any other treatment in use.
Nominal Diameter | 533 mm |
Nominal Impedance | 8 Ohm |
Minimum Impedance | 6,4 Ohm |
Nominal Power Handling1 | 1400 W |
Continuous Power Handling2 | 1600 W |
Sensitivity3 | 99,0 dB |
Frequency Range | 24 - 2000 Hz |
Voice Coil Diameter | 100 mm |
Winding Material | copper |
Surround Shape | Triple roll |
Cone Shape | Straight |
Magnet Material | Ferrite |
Woofer Cone Treatment | Weather protected |
Recommended Enclosure | 300,0 dm3 |
Recommended Tuning | 30 Hz |
Resonance Frequency | 28 Hz |
Re | 5,0 Ohm |
Qes | 0,24 |
Qms | 9,32 |
Qts | 0,24 |
Vas | 385,0 dm3 |
Sd | 0,17 cm2 |
Xmax | 9,5 mm |
Mms | 296,0 g |
Bl | 33,5 Txm |
Le | 2,85 mH |
EBP | 116 Hz |
Overall Diameter | 545 mm |
Bolt Circle Diameter | 520 mm |
Baffle Cutout Diameter | 492,0 mm |
Depth | 259 mm |
Flange and Gasket Thickness | 14 mm |
Net Weight | 17,0 kg |
Shipping Weight | 19,1 kg |
Shipping Box | 550 x 550 x 300 mm |
- Mms
- 296.0 g
- Sd
- 1660.0 cm2 (257.3 in2)
- Recommended Enclosure
- 300.0 dm3 (10.59 ft3)
- Empfindlichkeit
- 99.0 dB
- Woofer Cone Treatment
- Weather protected
- Versandgewicht
- 19.1 kg (42.11 lb)
- Flange and Gasket Thickness
- 14 mm (0.55 in)
- Surround Shape
- Triple roll
- EBP
- 116 Hz
- Schallwandausschnitt
- 492.0 mm (19.37 in)
- Tuning Frequenz
- 30 Hz
- Lochkreisdurchmesser
- 520 mm (20.47 in)
- Dauerbelastbarkeit
- 1600 W
- Resonanz Frequenz
- 28 Hz
- Qes
- 0.24
- BL
- 33.5 Txm
- Außendurchmesser
- 545 mm (21.46 in)
- MInimale Impedanz
- 6.4 Ω
- Versandkarton
- 550 x 550 x 300 mm (21.65x21.65x11.81 in)
- Wicklung besteht aus
- copper
- Xmax
- 9.5 mm
- Qts
- 0.24
- Einbautiefe
- 259 mm (10.2 in)
- Cone Shape
- Straight
- Vas
- 385.0
- Netto Gewicht
- 17.0 kg
- Nominaler Durchmesser
- 533 mm ( in)
- Schwingspulendurchmesser
- 100 mm (4.0 in)
- Frequenzbereich
- 24 - 2000 Hz
- Qms
- 9.32
- Nominale Belastbarkeit
- 1400 W
- Nominale Impedanz
- 8 Ω
- Magnet
- Ferrite
- Le
- 2.85 mH
- Re
- 5.0 Ω
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.