Eighteensound 12NCX750H 12inch Coaxial Lautsprecher 8 Ohm
ES12NCX750H
- 95.3 dB LF / 110 dB HF SPL 1W/1m average sensitivity
- Single magnet neodymium motor
- 800W LF - 240W HF maximum program power handling
- 75 mm (3”) LF Interleaved Sandwich Voice coil (ISV)
- Aluminum demodulating ring (SDR) for minimum LF distortion
- 60 mm (2.4”) HF Titanium diaphragm
- Edge-wound Aluminum ribbon HF voice coil (EWAL)
- HF copper sleeve for reduced distortion and higher output
- 70°H x 50°V nominal coverage
- Suitable for very compact enclosures and stage monitor
- Proprietary Phase Plug (3P)
The 12NCX750H is a 12" neodymium coaxial transducer designed for use in compact reflex enclosures and stage monitors as small as 40lt with a nominal dispersion of 70x50 degrees.The curvilinear profile LF cone provides smooth response within its intended frequency range thanks to its high damping pulp composition. The 75mm (3in) LF copper voice coil employs Interleaved Sandwich Voice coil (ISV) technology, in which a high strength former carries windings on both the outer and inner surfaces. This results in a balanced coil with a uniform distribution of mass and motive energy and an extremely linear motor assembly. The low distortion and sound quality are further improved by an aluminum demodulating ring (SDR technology) that flattens LF impedance and phase with constant power transfer.Equipped with a proprietary hybrid radial tangerine phase plug, the integrated HF compression driver has been designed to give a smooth, coherent wavefront at the horn entrance in all working frequency ranges with an high level of manufacturing consistency. The phase plug, with its short openings and high flare rate value, assures low distortion and remarkable improvements in mid-high frequency reproduction. A copper sleeve reduces the inductance value above 10kHz, improving phase and impedance linearization.The 2.4" diameter HF diaphragm assembly uses a high strength, high temperature treated Nomex voice coil former joined directly to the titanium diaphragm on its upper bend edge, assuring extended frequency energy transfer. This improves linearity and shows unparalleled reliability when compared with a straight former joint. A specific HF exit profile design has been chosen in order to maximize the cone’s profile coupling.The high force neodymium single magnet structure makes the 12NCX750H a lightweight speaker for its performance class - only 4.7 kg (10.36 lb).The XO12NCX dedicated passive crossover filter is provided, making this neo coaxial speaker a ready-to-use transducer system.Due to the widespread use of high power audio systems at outdoor events, the ability to perform in adverse weather conditions is an additional key feature of the 12NCX750H. This has been achieved using exclusive cone and magnet plate treatment processes which increase resistance against corrosion and make the cone water repellent.
Nominal Diameter | 300 mm |
Nominal Impedance | 8 Ohm |
Minimum Impedance LF | 6,4 Ohm |
Frequency Range | 60 - 4000 Hz |
Dispersion Angle1 | 70x50 ° |
Woofer Cone Treatment | Water repellent |
Magnet Material | Neodymium |
LF Sensitivity2 | 95,3 dB |
LF Nominal Power Handling3 | 400 W |
LF Continuous Power Handling4 | 800 W |
LF Voice Coil Diameter | 75 mm |
LF Winding Material | - Copper - |
HF Sensitivity5 | 110,3 dB |
HF Nominal Power Handling6 | 120 W |
HF Continuous Power Handling7 | 240 W |
HF Voice Coil Diameter | 60 mm |
HF Winding Material | Edge wound Aluminum |
Diaphragm Material | Titanium |
Recommended Crossover8 | 1,2 kHz |
Resonance Frequency | 58 Hz |
Re | 5,4 Ohm |
Qes | 0,31 |
Qms | 6,42 |
Qts | 0,29 |
Vas | 63,0 dm3 |
Sd | 531,0 cm2 |
No | 3,8 % |
Xmax | 5,5 mm |
Mms | 47,0 g |
Bl | 17,5 Txm |
Le | 0,62 mH |
EBP | 187 Hz |
Overall Diameter | 310 mm |
Bolt Circle Diameter | 295 mm |
Baffle Cutout Diameter | 280 mm |
Depth | 148 mm |
Flange and Gasket Thickness | 14 mm |
Net Weight | 4,7 kg |
Shipping Weight | 5,4 kg |
Shipping Box | 332 x 332 x 184 mm |
- MInimale Impedanz Tiefton
- 6.4 Ω
- Vas
- 63.0
- Xmax
- 5.5 mm
- Qms
- 6.42
- LF Continuous Power Handling
- 800 W
- Resonanz Frequenz
- 58 Hz
- HF Winding Material
- Edge wound Aluminum
- Frequenzbereich
- 60 - 4000 Hz
- Dispersion Angle
- 70x50 °
- HF Continuous Power Handling
- 240 W
- Recommended Crossover
- 1.2 kHz
- Magnet
- Neodymium
- Le
- 0.62 mH
- Versandgewicht
- 5.4 kg (11.9 lb)
- Diaphragm Material
- Titanium
- Nominaler Durchmesser
- 300 mm (11.81 in)
- Mms
- 47.0 g
- Woofer Cone Treatment
- Water repellent
- Qts
- 0.29
- ?0
- 3.8 %
- Netto Gewicht
- 4.7 kg
- HF Nominal Power Handling
- 120 W
- Außendurchmesser
- 310 mm (12.2 in)
- Re
- 5.4 Ω
- Schallwandausschnitt
- 280 mm (11.02 in)
- LF Winding Material
- - Copper -
- HF Sensitivity
- 110.3 dB
- Nominale Impedanz
- 8 Ω
- Flange and Gasket Thickness
- 14 mm (0.55 in)
- Einbautiefe
- 148 mm (5.83 in)
- LF Sensitivity
- 95.3 dB
- BL
- 17.5 Txm
- EBP
- 187 Hz
- LF Voice Coil Diameter
- 75 mm (2.95 in)
- Qes
- 0.31
- Lochkreisdurchmesser
- 295 mm (11.61 in)
- Versandkarton
- 332 x 332 x 184 mm (13.07x13.07x7.24 in)
- Sd
- 531.0 cm2 (82.31 in2)
- LF Nominal Power Handling
- 400 W
- HF Voice Coil Diameter
- 60 mm (2.36 in)
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.