- 97 dB SPL 1W / 1m average sensitivity
- 135 mm (5.3 in) ISV aluminum voice coil
- 3600 W program power handling
- Carbon fiber reinforced cone
- Double Silicon Spider (DSS) technology
- Low noise forced ventilation design reduces power compression
- High grade neodymium magnet assembly
- Weather protected cone and plates for outdoor usage
- Suitable for vented and bandpass high SPL subwoofer systems
The 18NLW9000 is an 18 inch neodymium high performance subwoofer. The loudspeaker has been directly derived from our flagship 18NLW9600, and has been optimized for vented and bandpass subwoofer cabinet designs. For optimum results recommended amplifier should be able to deliver 3600 Watt program power without clipping. Eighteen Sound engineers have obtained the best possible results with today's available materials in terms of clean and undistorted LF reproduction at a ultra high SPL, with the lowest possible power compression figure. The transducer design features include a large displacement suspension system specifically designed for matching the carbon fiber reinforced, straight ribbed cone. Thanks to the Double Silicon Spider (DSS) technology, the 18NLW9000 is able to control the moving mass with high linearity, showing an exceptional stability of mechanical parameter values in the long term. Bl force factor, as well as all other electro-dynamic parameters, are linear within the working range. This, together with the exceptional high excursion behavior - 70mm before damage, ±14mm linear Xmax - makes the 18NLW9000 an extremely low distortion, highly dynamic transducer. The state-of-the-art 5,3" inside outside ISV (Interleaved Sandwich Voice Coil) aluminum voice coil enables the 18NLW9000 to handle 3600W program power value. The 18NLW9000 has been developed after intense FEA and fluidodynamics simulation and testing, focusing on dissipating the heat generated by the powerful voice coil. Special attention was given to the optimization of air flow into the gap without introducing audible noise. A low-density material air diffractor placed into the heatsink acts as a cooling system, increasing the power handling capability and lowering the power compression figure. 18NLW9000 is able to perform properly under inclement weather conditions: the exclusive cone treatment improves pulp strength and gives water repellent properties to both sides of the cone. A special coating applied to both the top and back plates makes the transducer far more resistant to the corrosive effects of salts and oxidization.
Nominal Diameter | 462 mm (18 in) |
Rated Impedance | 8 Ohm |
AES Power | 1800W |
Program Power | 3600W |
Peak Power | 10000W |
Sensitivity | 97 dB |
Frequency Range | 32 - 2500 Hz |
Power Compression @-10dB | 0,7 dB |
Power Compression @-3dB | 1,2 dB |
Power Compression @Full Power | 2,2 dB |
Max Recomm. Frequency | 150 Hz |
Recomm. Enclosure Volume | 120 ÷ 350 lt. (4.2 ÷ 12.4 cuft) |
Minimum Impedance | 6,7 Ohm at 25°C |
Max Peak To Peak Excursion | 70 mm (2,75 in) |
Voice Coil Diameter | 135 mm (5,3 in) |
Voice Coil Height | 32 mm (1.26 in) |
Voice Coil Technology | 2 layers copper clad aluminum wire |
Gap Depth | 12 mm (0.47 in) |
Suspension | Triple Roll, Polycotton |
Cone | Straight ribbed, carbon fiber reinforced cellulose |
Fs | 34 Hz |
Re | 5,5 Ohm |
Sd | 0,1225 sq.mt. (190 sq.in.) |
Qms | 7 |
Qes | 0,32 |
Qts | 0,31 |
Vas | 206 lt. (7.3 cuft) |
Mms | 218 gr. (0,48 lb) |
BL | 26.8 Tm |
Linear Mathematical Xmax | ±14 mm (±0,55 in) |
Le (1kHz) | 1,90 mH |
Ref. Efficiency 1W@1m (half space) | 96,1 dB |
Overall diameter | 462 mm (18,18 in) |
N. of mounting holes and bolt | 8 |
Mounting holes diameter | 8,5 mm (0,33 in) |
Bolt circle diameter | 440mm (17,32 in) |
Front mount baffle cutout ø | 416 mm (16,38 in) |
Rear mount baffle cutout ø | 422 mm (16,61 in) |
Total depth | 237,5 mm (9,3 in) |
Flange and gasket thickness | 26 mm (1,02 in) |
Net weight | 12,5 kg (27,6 lb) |
Shipping weight | 13,8 kg (30,42 lb) |
CardBoard packaging dimensions | 482x482x257 mm (19x19 x10,1 in) |
- Nominale Impedanz
- 8 Ω
- Xmax
- 14.0 mm
- Frequenzbereich
- 32 - 2500 Hz
- Schallwandausschnitt
- 422.0 mm (16.61 in)
- Qms
- 7.0
- Sd
- 1222.0 cm2 (189.41 in2)
- Einbautiefe
- 237 mm (9.35 in)
- Le
- 1.9 mH
- Schwingspulendurchmesser
- 135 mm (5.31 in)
- BL
- 28.0 Txm
- Nominale Belastbarkeit
- 1800 W
- MInimale Impedanz
- 6.7 Ω
- Qes
- 0.32
- Dauerbelastbarkeit
- 3600 W
- Außendurchmesser
- 462 mm (18.19 in)
- Tuning Frequenz
- 36 Hz
- Mms
- 218.0 g
- Netto Gewicht
- 12.5 kg
- Re
- 5.5 Ω
- Versandgewicht
- 14.0 kg (30.86 lb)
- Vas
- 206.0
- Recommended Enclosure
- 200.0 dm3 (7.06 ft3)
- Flange and Gasket Thickness
- 26 mm (1.02 in)
- Empfindlichkeit
- 97.0 dB
- Versandkarton
- 482 x 482 x 257 mm (18.98x18.98x10.12 in)
- Qts
- 0.31
- Lochkreisdurchmesser
- 440 mm (17.32 in)
- Resonanz Frequenz
- 34 Hz
- EBP
- 106 Hz
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.