Eighteensound ND1090 1inch Hochtontreiber 8 Ohm
ESND1090
- 1 inch exit throat
- 109 dB 1W / 1m average sensitivity
- 80 Watt program power handling
- 44 mm (1 3/4 inch) edgewound aluminum voice coil
- PEN diaphragm for extended frequency response
- Proprietary phase plug design
- Neodymium ring magnet for excellent transient response
- Excellent thermal exchange
The ND1090 1 inch exit neodymium high frequency compression driver has been designed for situations where the highest quality is required. Equipped with unique Phase Plug architecture, the ND1090 has been designed to give high level manufacturing consistency and a smooth coherent wavefront at the horn entrance across the whole working frequency range. The phase plug short openings and high flare rate value assure low distortion, showing remarkable improvements in mid-high frequency reproduction. The ND1090 diaphragm assembly is composed of a titanium dome sandwiched to a proprietary treated polyester suspension. This design maintains low resonance and lowers the minimum crossover point value to 1.6kHz. An edge-wound aluminum voice coil, wound on proprietary treated Nomex, completes the diaphragm assembly. Nomex shows a 30% higher value of tensile elongation at a working operative temperature (200°C) when compared to Kapton. Moreover, this proprietary former material is also suitable for use in high moisture content environments. The powerful neodymium magnet assembly has been designed to obtain 20 KGauss in the gap giving major benefits in transient response. A copper ring on the pole piece reduces inductance above 10 kHz, improving phase and impedance linearization. The custom designed O-ring creates a tight seal between the plate and the cover assuring air chamber loading. Excellent heat dissipation and thermal exchange are guaranteed by the direct contact between the magnetic structure and the aluminum cover which leads to a lower power compression value. The ability to perform properly under inclement weather conditions is a key feature of the Eighteen Sound philosophy. Hence, in addition, a special treatment has been applied to the magnet and the top and back plates of the magnetic structure making the ND1090 driver more resistant to the corrosive effects of salts and oxidization. This treatment is more effective than any other treatment used by other manufacturers.
Throat Diameter | 25 mm |
Nominal Impedance | 8 Ohm |
Minimum Impedance | 7,0 Ohm |
Nominal Power Handling1 | 50 W |
Continuous Power Handling2 | 100 W |
Sensitivity3 | 110,0 dB |
Frequency Range | 1,6 - 20,0 kHz |
Recommended Crossover4 | 1,6 kHz |
Voice Coil Diameter | 44 mm |
Winding Material | Aluminum |
Diaphragm Material | Titanium - Pen |
Flux Density | 2,0 T |
Overall Diameter | 93 mm |
Depth | 53 mm |
Net Weight | 1,1 kg |
Shipping Weight | 1,2 kg |
Shipping Box | 97x97x58 mm |
- Empfindlichkeit
- 110.0 dB
- Einbautiefe
- 53 mm (2.09 in)
- Schwingspulendurchmesser
- 44 mm (1.75 in)
- Recommended Crossover
- 1.6 kHz
- Dauerbelastbarkeit
- 100 W
- Wicklung besteht aus
- Aluminum
- Frequenzbereich
- 1.6 - 20.0 kHz
- Versandkarton
- 97x97x58 mm (3.82x3.82x2.28 in)
- Throat Diameter
- 25 mm (1.0 in)
- Netto Gewicht
- 1.1 kg
- Versandgewicht
- 1.2 kg (2.65 lb)
- Außendurchmesser
- 93 mm (3.66 in)
- MInimale Impedanz
- 7.0 Ω
- Nominale Impedanz
- 8 Ω
- Diaphragm Material
- Titanium - Pen
- Nominale Belastbarkeit
- 50 W
- Flux Density
- 2.0 T
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.