Eighteensound 10CX650 10inch Coaxial Lautsprecher 8 Ohm
ES10CX650
- 94.0 dB LF/106.5 dB HF SPL 1W/1m average sensitivity
- Single magnet motor
- 400W LF - 140W HF maximum program power handling
- 65 mm (2.5”) LF voice coil
- 44 mm (1.75”) HF PEN diaphragm
- Proprietary Phase Plug design
- HF copper sleeve for reduced distortion and higher output
- 90 degrees nominal conical dispersion
- Atmos™ ready*
- Extended LF design
- Suitable for very compact enclosures and stage monitors
The 10CX650 is a 10" - 1" coaxial transducer designed for use in compact reflex enclosures and stage monitors as small as 30 lt, with a nominal dispersion of 90 degrees.The high force ceramic single magnet structure makes the 10CX650 a lightweight speaker for its performance class - only 6 kg (13.2 lb).The 65 mm (2.5 in) LF edgewound CCAW voice coil employs our Interleaved Sandwich Voice coil (ISV) technology, in which a high strength fiberglass former carries windings on both the outer and inner surfaces to achieve a balanced coil with a uniform distribution of mass and motion energy. This results in an extremely linear motor assembly.The low profile curvilinear LF cone provides a smooth response within its intended frequency range and maximum reliability under high mechanical stress.Equipped with a proprietary hybrid radial tangerine phase plug, the integrated HF compression driver has been designed to give smooth coherent wavefront at the horn entrance in all working frequency ranges with a high level of manufacturing consistency. The phase plug, with its short openings and high flare rate value, assures low distortion and remarkable improvements in mid-high frequency reproduction. A copper sleeve reduces inductance values above 10kHz, improving phase and impedance linearization.The HF diaphragm assembly is made with a proprietary treated Polyethylene material. Thanks to its superior diaphragm dimensional stability, the polyethylene shows consistent behavior throughout its whole working life. Moreover, this particular material with its very high value of elasticity modulus is capable of superior transient and intermodulation distortion response. The flat suspension shape is designed to maintain low stiffness and low mid band distortion and response.An edge-wound aluminum voice coil wound on proprietary treated Nomex completes the diaphragm assembly. Thanks to its physical properties, the proprietary treated Nomex former shows a 30% higher value of tensile elongation at a working operative temperature, when compared to Kapton. This feature enables proper energy transfer control from the voice coil to the dome in real working conditions. Moreover, this former material is suitable for use in damp and wet environments.A specific dedicated HF driver throat design has also been chosen, maximizing the cone’s profile coupling.
Nominal Diameter | 260 mm |
Nominal Impedance | 8 Ohm |
Minimum Impedance LF | 6,1 Ohm |
Frequency Range | 60 - 4800 Hz |
Dispersion Angle1 | 90 ° |
Woofer Cone Treatment | Humidity repellent |
LF Sensitivity2 | 94,0 dB |
LF Nominal Power Handling3 | 200 W |
LF Continuous Power Handling4 | 400 W |
LF Voice Coil Diameter | 65 mm |
LF Winding Material | Edgewound copper |
HF Sensitivity5 | 106,5 dB |
HF Nominal Power Handling6 | 70 W |
HF Continuous Power Handling7 | 140 W |
HF Voice Coil Diameter | 44 mm |
HF Winding Material | Edge wound Aluminum |
Diaphragm Material | PEN |
Recommended Crossover8 | 1,6 kHz |
Resonance Frequency | 54 Hz |
Re | 5,1 Ohm |
Qes | 0,39 |
Qms | 5,9 |
Qts | 0,35 |
Vas | 36,4 dm3 |
Sd | 346,0 cm2 |
No | 1,5 % |
Xmax | 6,0 mm |
Mms | 39,5 g |
Bl | 14,0 Txm |
Le | 0,9 mH |
EBP | 138 Hz |
Overall Diameter | 260 mm |
Bolt Circle Diameter | 243 mm |
Baffle Cutout Diameter | 230 mm |
Depth | 155 mm |
Flange and Gasket Thickness | 8 mm |
Net Weight | 6,2 kg |
Shipping Weight | 6,8 kg |
Shipping Box | 275x275x195 mm |
- Diaphragm Material
- PEN
- Vas
- 36.4
- Einbautiefe
- 155 mm (6.1 in)
- Versandgewicht
- 6.8 kg (14.99 lb)
- BL
- 14.0 Txm
- HF Continuous Power Handling
- 140 W
- Woofer Cone Treatment
- Humidity repellent
- HF Voice Coil Diameter
- 44 mm (1.75 in)
- Xmax
- 6.0 mm
- ?0
- 1.5 %
- LF Nominal Power Handling
- 200 W
- Dispersion Angle
- 90 °
- HF Winding Material
- Edge wound Aluminum
- Le
- 0.9 mH
- EBP
- 138 Hz
- Re
- 5.1 Ω
- Lochkreisdurchmesser
- 243 mm (9.57 in)
- MInimale Impedanz Tiefton
- 6.1 Ω
- Qts
- 0.35
- LF Voice Coil Diameter
- 65 mm (2.5 in)
- Qms
- 5.9
- Schallwandausschnitt
- 230 mm (9.06 in)
- HF Nominal Power Handling
- 70 W
- Sd
- 346.0 cm2 (53.63 in2)
- HF Sensitivity
- 106.5 dB
- Netto Gewicht
- 6.2 kg
- Versandkarton
- 275x275x195 mm (10.83x10.83x7.68 in)
- Nominaler Durchmesser
- 260 mm (10.24 in)
- Qes
- 0.39
- Mms
- 39.5 g
- LF Continuous Power Handling
- 400 W
- LF Winding Material
- Edgewound copper
- Frequenzbereich
- 60 - 4800 Hz
- Resonanz Frequenz
- 54 Hz
- Flange and Gasket Thickness
- 8 mm (0.31 in)
- Recommended Crossover
- 1.6 kHz
- Außendurchmesser
- 260 mm (10.24 in)
- LF Sensitivity
- 94.0 dB
- Nominale Impedanz
- 8 Ω
Wir informieren Sie gern darüber, falls der Preis dieses Artikels Ihrem Wunschpreis entspricht.
Artikel bewerten
Es liegen keine Bewertungen zu diesem Artikel vor.